[1]栗卓新,張?zhí)炖?Kim H J.低合金高強鋼焊縫金屬中AF的研究進展[J].中國材料進展,2012,(1):050-55.[doi:10.7502/j.issn.1674-3962.2012.01.08]
LI Zhuoxin,ZHANG Tianli,Kim H J.Research Progress on AF in Weld Metal for HSLA Steel[J].MATERIALS CHINA,2012,(1):050-55.[doi:10.7502/j.issn.1674-3962.2012.01.08]
點擊復制
低合金高強鋼焊縫金屬中AF的研究進展(
)
中國材料進展[ISSN:1674-3962/CN:61-1473/TG]
- 卷:
-
- 期數:
-
2012年第1期
- 頁碼:
-
050-55
- 欄目:
-
研究報告
- 出版日期:
-
2012-01-25
文章信息/Info
- Title:
-
Research Progress on AF in Weld Metal for HSLA Steel
- 作者:
-
栗卓新; Kim H J
-
(1. 北京工業大學材料科學與工程學院，北京 100124)
(2. 韓國工業技術研究院高級熔焊研究組，天安 330-825)
- Author(s):
-
LI Zhuoxin1; ZHANG Tianli1; Kim H J2
-
(1. The College of Materials Science and Engineering, Beijing University of Technology, Beijing 100124, China)
(2. Advanced Joining Research Team, Korea Institute of Industrial Technology, Cheonansi 330-825, Korea)
-
- 關鍵詞:
-
低合金高強鋼; 針狀鐵素體; 合金元素; 夾雜物; 熱輸入
- DOI:
-
10.7502/j.issn.1674-3962.2012.01.08
- 文獻標志碼:
-
A
- 摘要:
-
綜述了國內外對于低合金高強鋼(HSLA，High Strength Low Alloy)焊縫金屬中針狀鐵素體(AF，Acicular Ferrite)的最新研究進展得出，要想獲得較多的AF，主要從3個方面加以有效控制：① 合金元素中含005%~010% C，且C當量小于039，合理控制Mn，Ni，Ti，B之間的相互比例，保持硼氮比(B/N)在06~08之間，鋁氧比(Al/O)在043~073之間，降低N，S，P含量；② 夾雜物尺寸為05~08 μm，表面富10~20 nm TiO薄層且呈球形，促使生成更多的第Ⅲ、Ⅳ類夾雜物；③ 較低熱輸入(HI， Heat Input)時合金元素?zé)龘p較少，冷卻速率較快，焊縫組織得以細化。
- Abstract:
-
This paper reviews the newest worldwide research progress on acicular ferrite (AF) in weld metal for high strength low alloy (HSLA) steel. More AF can be mainly obtained by the effective control of three aspects: ① when C content is between 005 and 010% with a carbon equivalent of less than 039, the ratios between Mn, Ni, Ti, and B can be reasonably controlled, and the ratio of B/N is between 06 and 08, Al/O is between 043 and 073, while N, S, P contents are reduced; ② when the size of inclusion is in the range of 05~08 μm with 10~20 nm TiO in the inclusion surface and with its shape being globular, then more third and fourth types of inclusions can be obtained;
更新日期/Last Update:
2012-02-09