文章信息/Info

Title:

Size Effects on the Strengthening/Toughening of Nanostructured Metallic Multilayers

作者:

張金鈺; 劉剛; 孫軍

西安交通大學金屬材料強度國家重點實驗室

Author(s):

ZHANG Jinyu;  LIU Gang;  SUN Jun

State Key Laboratory for Mechanical Behavior of Materials, Xi‘a(chǎn)n Jiaotong University

關鍵詞:

納米金屬多層膜; 界面; 塑性變形; 斷裂行為; 強韌化機制; 尺寸效應

DOI:

10.7502/j.issn.1674-3962.2016.05.07

文獻標志碼:

A

摘要:

如何有效地協調和平衡材料強度與韌性之間的矛盾, 大幅度地提高結構材料的損傷容限, 是非均質金屬材料微觀結構敏感性設計的巨大挑戰。納米金屬多層膜作為一類典型的非均質金屬材料，由于不僅可以調整其組元幾何和微觀結構尺度，而且可以引入具有不同本征性能的組元材料和不同結構的層間異質界面，因此在獲得高強高韌金屬結構材料方面具有潛在的能力。結合當前國內外有關金屬多層膜塑性變形強韌化機制及其尺寸與界面效應研究的最新進展, 分別闡述了晶體/晶體Cu/X（X=Cr, Nb, Zr)與晶體/非晶Cu/Cu-Zr金屬多層膜/微柱微觀結構-尺寸約束-服役性能三者之間的關聯性, 并對納米金屬多層膜研究的發展趨勢進行了展望。

Abstract:

How to defeat the conflict of strength vs toughness and achieve unprecedented levels of damage tolerance within structural materials is a grand challenge for their microstructure�瞫ensitive design of heterogeneous metallic materials. Nanostructured metallic multilayers act as one class of typical heterogeneous materials and manifest great potential to obtain the structural materials with the combination of high strength and superior toughness, due to their tunable dimensional and microstructural length of the constituents as well the great advantage of tunable interfacial structures via introducing different constituents. The present authors had systematically investigated the size and interface effects on the mechanical properties, such as hardness/strength, tensile ductility, fracture toughness, and strengthening/toughening mechanisms of crystalline/crystalline Cu/X (X=Cr, Nb, Zr) and crystalline/amorphous Cu/Cu�瞆r nanolayered films/micropillars. In this paper, based on these experimental results achieved by the present authors, as well as the progresses at home and abroad made in the plastic deformation behavior of NMMs, the correlation of microstructure�瞫ize constraint�瞞echanical performance in NMMs (and nanolayered micropillars) is reviewed. Finally, a brief prospect on the studies of NMMs in future is discussed.