文章信息/Info

Title:

Research Progress of Anti-Icing Technology of Superhydrophobic Coating

文章編號:

1674-3962(2024)04-0301-10

作者:

陳小東; 胡麗娜; 杜一枝

新疆大學電氣工程學院，新疆 烏魯木齊 830017

Author(s):

CHEN Xiaodong;  HU Lina;  DU Yizhi

School of Electrical Engineering, Xinjiang University, Urumqi 830017, China

關鍵詞:

電力系統; 超疏水涂層; 防覆冰機理; 環境因素; 基底因素

Keywords:

power system;  superhydrophobic coating;  anti-icing mechanism;  environmental factors;  substrate factors

分類號:

TG174.4

DOI:

10.7502/j.issn.1674-3962.202204022

文獻標志碼:

A

摘要:

覆冰現象時刻威脅著電力系統的安全運行，過去幾十年里，研究人員采用各種措施來預防電力設備表面覆冰，但這些措施都無法從根本上解決該問題。超疏水涂層由于具有獨特的微納米結構及低表面能物質，在低溫環境下，能夠延緩結冰且降低表面的冰附著力。從超疏水涂層的防覆冰機理入手，重點綜述國內外超疏水涂層防覆冰的實驗研究現狀，并將影響防覆冰性能的因素分為環境因素和基底因素，分析當前方案的局限性，同時闡述提高超疏水涂層機械魯棒性的設計與制備方面的最新進展，最后提出超疏水涂層在電力系統應用中存在的問題以及未來的發展方向。該綜述有助于研究人員建立評估超疏水涂層的防覆冰性能的試驗規范，并推進超疏水涂層防覆冰技術在電力系統中的應用。

Abstract:

Icing always threatens the safe operation of power system. In the past few decades, researchers have taken various measures to prevent the icing on the surface of power equipments, but these measures can not fundamentally solve this problem. Due to its unique micro-nano structure and low surface energy materials, superhydrophobic coating can delay icing and reduce the adhesion ability of surface ice at low temperature. Therefore, started with the anti-icing mechanism of superhydrophobic coating, this paper focuses on the experimental research status of anti-icing of superhydrophobic coating at home and abroad, divides the factors affecting the anti-icing performance into environmental factors and substrate factors, analyzes the limitations of the current schemes, and expounds the latest design and preparation progress on improving the mechanical robustness of superhydrophobic coating. Finally, the problems existing in the application of superhydrophobic coating in power system and the future development direction are put forward. This review is helpful for researchers to establish test specifications for evaluating the anti�瞚cing performance of superhydrophobic coatings and promote their application in power system.