文章信息/Info

Title:

Strengthening and Toughening of Cast Al-Li Alloys: Research Progress and Future Prospect

文章編號:

1674-3962(2022)11-0869-11

作者:

吳國華1; 戚方舟1; 張小龍1; 張亮1; 童鑫1; 李良彬2; 熊訓滿2; 丁文江1

（1. 上海交通大學材料科學與工程學院，上海 200240）（2. 江西贛鋒鋰業股份有限公司，江西 新余 338004）

Author(s):

WU Guohua1;  QI Fangzhou1;  ZHANG Xiaolong1;  ZHANG Liang1;  TONG Xin1;  LI Liangbin2;  XIONG Xunman2;  DING Wenjiang1

(1. School of Materials Science and Engineering, Shanghai Jiao Tong University, Shanghai 200240, China) (2. Jiangxi Ganfeng Lithium Co., Ltd., Xinyu 338004, China)

關鍵詞:

鑄造鋁鋰合金; 強塑性; 合金化; 熱處理; 微觀組織

Keywords:

cast Al-Li alloy;  strength and toughness;  alloying;  heat treatment;  microstructure

分類號:

TG146.21

DOI:

10.7502/j.issn.1674-3962.202206015

文獻標志碼:

A

摘要:

鑄造鋁鋰合金具有低密度、高模量、高比強度和比剛度等優點，適用于制備復雜薄壁構件，是航空航天、國防軍工行業理想的結構材料。基于鑄造鋁鋰合金的組織特征，探索提升合金強塑性的有效途徑，可以夯實鑄造鋁鋰合金在輕量化領域的優勢地位，擴大其應用范圍。首先，概括了國內外鑄造鋁鋰合金的發展歷程，歸納了鑄造鋁鋰合金的組織特征與強韌化機制。然后，圍繞鑄造鋁鋰合金強韌化研究的最新進展，系統分析了合金化與熱處理對鑄造鋁鋰合金微觀組織及力學性能的影響規律，總結了提升鑄造鋁鋰合金強塑性的主要途徑。最后，面向鑄造鋁鋰合金實際工程需求，對其強韌化處理中尚存的科學難題與未來的研究方向進行了探討與展望。

Abstract:

Cast aluminum-lithium (Al-Li) alloy has the advantages of low density, high modulus, high specific strength and stiffness, and is suitable for the preparation of thin-walled components with complex structure, which is an ideal structural material for aerospace and defense industry. Based on the microstructural characteristics of cast Al-Li alloy, exploring the effective way to enhance the strength and toughness of the alloy can consolidate its advantageous position and expand its application scope in the field of lightweight. In this work, the development history of cast Al-Li alloys at home and abroad was firstly outlined, and the microstructural characteristics along with strengthening and toughening mechanism of cast Al-Li alloys were recapitulated. Then, the influence of alloying and heat treatment on the microstructure and mechanical properties of cast Al-Li alloys were systematically analyzed, and the main ways to improve the toughness of cast Al-Li alloys were summarized. Finally, for the actual engineering needs, the remaining scientific problems on the strengthening and toughening of cast Al�睱i alloys were discussed and the future research directions were prospected.